Skip to content
Contact
ITEN
FrançaisDeutschEspañol

The machine park

Single Machines

Every single group that makes up a line, designed, built and reconditioned in-house by ROLM.

DecoilersDecoilers for loading the coil at line entry, motorised and expandable, built cantilever or double-mandrel.
Capacity
up to 30,000 kg
Usable width
200 – 2000 mm
RecoilersRecoilers for rewinding the strip downstream of the slitter, cantilever type complete with third support.
Capacity
up to 30,000 kg
Usable width
200 – 2000 mm
LevellersPrecision roll levellers for sheet flatness, built and reconditioned by ROLM for thicknesses from 0.5 to 6 mm and widths from 500 to 2000 mm, on steel, stainless, aluminium and bronze, up to 60 m/min.
Wall thickness
0.5 – 6 mm
Width
500 – 2000 mm
Flying / Rotary ShearsShears for continuous cut-to-length, flying or rotary, built by ROLM for thicknesses from 0.5 to 6 mm and widths from 1250 to 2000 mm on steel, stainless, aluminium and magnetic sheet, up to 60 m/min.
Wall thickness
0.5 – 6 mm
Width
1250 – 2000 mm
Slitter HeadsHigh-technology systems for the longitudinal cutting of coils, built to measure for thicknesses from 0.5 to 6 mm and widths from 500 to 2000 mm on steel, stainless, aluminium and magnetic sheet, up to 250 m/min.
Wall thickness
0.5 – 6 mm
Width
500 – 2000 mm
Tube Cut-Off SawsIn-line cut-off saws for cutting tube downstream of sizing, in traditional or linear-motor versions, for tube from Ø 8 to Ø 152 mm and 0.5 to 6 mm thick, up to 200 m/min.
Wall thickness
0.5 – 6 mm
Tube diameter
Ø 8 – 152 mm
FeedersPinch-roll feeders for the controlled advance of sheet: for cutting lines and for press feeding.
Pinch roll
For cutting lines
Pinch roll
For press feeding
PackersPackers for the automatic forming of bundles, available for sheet stacks and for tube bundles.
Packers
For sheets
Packers
For tubes
Bundling UnitsBundling units for strapping bundles, built by ROLM for thicknesses from 0.5 to 6 mm on steel, stainless, aluminium, magnetic sheet, copper and brass.
Wall thickness
0.5 – 6 mm
Materials
Aluminium · carbon steel · stainless · magnetic sheet · copper · brass
Loading / Unloading CarriagesMotorised carriages for coil handling, loading or unloading, pit-mounted or above-ground, with capacity up to 30,000 kg and a strip-containment system.
Capacity
up to 30,000 kg
Type
Pit-mounted or above-ground
Third SupportsThird supports to increase the capacity and safety of decoilers and recoilers, holding the coil during processing.RampsRamps for the entry and exit of material from the line pits.

Engineer your next line with ROLM